READ.ME ( This file ) *** INSTALLATION INSTRUCTIONS END/OF/THIS/FILE *** ------------------------------------------ FIRST: We would like to point out FIRST that you may need to modify your config.sys file to reflect the following: Files = 50 ( or more ) Buffers = 20 ( or more ) SECOND: We would like to point out that our program requires 450KB-RAM to run. If this presents a problem or if you get an error message you have a number of choices: 1. Remove one or more TSR's (memory resident programs) ** Simply add REM at the beginning of the line. 2. Install a memory manager (we use 386MAX-Vers 7.0 on our Windows for Workgroups network). 3. Upgrade the memory in your PC ( If you have less than 512KB-RAM ) 4. Contact us directly 715/399-2758 and we will help you with specific suggestions for your PC's setup. 5. TECHNICAL SUPPORT IS "FREE" TO REGISTERED END-USERS! ---------------------------------------------------- - SHAREWARE VERSION - $ 10.00 WINDOWS95 VERSION - $ 19.95 ====================================================================== You have received the Shareware Version.... Allowing you to track your favorite animal's history and medical information. Please register your Shareware program by going to the REPORTS Menu and printing the ORDER-FORM and mailing it along with the $10 OR $19.95 Registration Fee to the address on the form. ====================================================================== This version is for owners, breeders and handlers of animals that are SHOW QUALITY and participate on a regular basis in Competition. This version is NOT limited to DOGS & CATS! but rather adds choices for other animals. (( Should you have specific questions prior to ordering, please feel free to call us: 715/399-2758)). This program was written with the idea that it would be run on PC's with color monitors, if you do not have a color monitor, some parts of the program may be a little difficult to see? as we have used color monitors since 1984 we no longer write for MONOCHROME. Shareware registration is only $ 10.00. This software was written using a DOS-4GL running on a Packard-Bell 486DX2-50Mhz with SVGA monitor, 2-850MB Hard-disks and a Conner Tape backup system. This 486 acts as a file server on a 3 station Windows for Workgroups network. The other PC's are 486DX-33Mhz PC's. The Main PC uses 8MB-Ram the others use 8MB-Ram also. We utilize Intel-SatisFAXtion 400(internal) FAX-Modems with UART buffers and 512KB-Ram on-board, running under Windows 3.1 and Windows for Workgroups Version 3.11. Our normal working hours are Monday -> Friday 9:00AM -> 9:00PM C.S.T. Voice Phone 715/399-2758 \ 9:00AM -> 9:00PM - ANSWERING MACHINE LATER Fax Phone 715/399-2758 / We write all of our software with the idea that it will run on at least a 386SX, Although our programs will run on older IBM-AT's and XT's however, please note that our software in many cases is CPU-Time sensitive, meaning it will run faster on faster CPU's. Please be advised that currently (4/964) Intel is pushing their PENTIUM grade processors which will eventually make XT's, AT's, 386SX's, 386DX's as well as 486SX's OBSOLETE. CUSTOM PROGRAMMING=================================================== We do write custom software for companies in the Twin Ports area, for more information call us at: 715/399-2758 PC-CONSULTING========================================================= We are available for consulting on PC's, Networks, as well as larger systems. FAX-BACK Service====================================================== KEHO & ASSOCIATES 6429 SOUTH LEGGATE ROAD SUPERIOR, WI 54880-8351 ===================================================================== *** INSTALLATION INSTRUCTIONS *** ===================================================================== General Information ------------ This program can reside & run in ANY DOS Directory on ANY DOS hard-drive! ------------------------------------------------------------------------- The following instructions explain making a directory and installing your program into/onto that directory. From a DOS prompt........... md \anyname ( This makes a directory, hard-drive of choice ) copy kapets.zip \anyname ( Copies main file to that directory ) cd \anyname ( Takes you to ANYNAME Directory ) TYPE pet_show ( Opens compressed-File / Program files ) PETS (PETS.EXE) ( Starts the program / Goes to MAIN-MENU ) --------------------------------------------------------------------- Using Windows, simply use your FILE MANAGER to create a Directory and copy kapets.zip to that directory. You will still need to run PKUNZIP to Un-Zip the KAPETS.ZIP program files. --------------------------------------------------------------------- F1:Help is abundantly available evrywhere in the program should you have any questions or problems. Our program is compatible with just about any known printer, in addition you can view all reports, print all reports, Print multiple copies, or save them to an ASCII file that will allow you to import them into your favorite word-processor and re-design them to your liking! Should you experience any problems with installation feel free to contact us directly. 715/399-2758 9:00AM -> 9:00PM Your Success with our software is important to us.............